Nylon 6 dipped cord fabric
| Cord fabric structure | 1880х1х2 | 1440х1х2 |
| Tensile strenght, N/(kgf), min | 290 (29,6) | 201 (20,5) |
| Twists per meter : - single twist - cord twist |
326±20 318±20 |
370±20 360±20 |
| Elongation, %: - at 20 N - at 39 N - at break |
3,0 ± 1,0 6,0 ± 1,0 23,0 ± 2,0 |
|
| Hot air shrinkage at 160° С, 20 min, %, max |
7,5 * | 7,5 * |
| Fabric width, cm | as on agreement | |
| Total number of ends per 10 cm - by warp - by weft |
as on agreement | |
| Adhesion, N, min** | 137 | 130 |
| Dip pick up ,% | 4,5±1,0 | |
| Roll diameter | up to 2m | |
| * If agreed with a customer change of test methods and correspondingly change of nominal values are admitted ** For determination of parameter the rubber mixture of the customer is used. In case of change of consumer’s rubber type the value is subject to be agreed between the supplier and the customer |
||
PACKING
Dipped cord fabric preliminarily wound on a shell is packed in the way as follows:
- a roll is wrapped up with foamed polyethylene of 3 mm thickness. On each roll end there is put one cardboard circle with bags consisting moisture absorbing substance preliminarily fixed on it. Then a layer of polyethylene foil with hole for a shell is put after circle upon which fiberboard circles are put on each roll end. A roll together with a shell is wrapped up with black polyethylene stretch-foil of 23 μm thickness and 15-25 revolutions of packing machine, wrapped with 2 layers of cardboard and a case of polypropylene industrial fabric is put on it.
TRANSPORTATION
Cord fabric is carried in 40’ containers, boxcars and trucks